Monolithic Silicon Carbide Cyclone le Hydrocyclone Liners
Polyurethane Encased Hydrocyclone Liners
Tharollo ea senotlolo sa YIHO bakeng sa li-separators tsa hydrocyclone slurry le lisebelisoa tse ling tsa ho lokisa liminerale li fana ka likopano tse nang le mohloli o le mong, tse phethiloeng ka libeke tse seng kae.Moo ho hlokehang, lihlahisoa tsa rona tsa thepa ea silicon carbide tse thehiloeng li ka lahleloa ka libopeho tse rarahaneng ebe li kenngoa ka har'a polyurethane ka tlung, ho fana ka boiketlo ba ho kenya, ho fokotsa ho phatloha le ho eketsa inshorense ea ho apara, ha bohle ba ntse ba fana ka tharollo e feletseng ho tsoa ho morekisi a le mong.Ts'ebetso ea VERKAPSE e fokotsa litšenyehelo le nako ea ho etella pele bakeng sa bareki ha e ntse e fana ka sehlahisoa se nang le nako e telele e tšoarellang le e tšepahalang.
Lisebelisoa tsohle tse thehiloeng ho silicon carbide li ka etsoa ka libopeho tse rarahaneng haholo, li bonts'a mamello e tiileng le e pheta-phetoang e netefatsang hore ho kengoa habonolo.Lebella sehlahisoa se sa khoneng ho senya ho feta litšepe tse entsoeng ka tšepe, rabara le urethane feela ho karolo ea boraro ea boima ba litšepe tsa tsona.Tsohle li fana ka khanyetso e phahameng haholo ea mocheso le kutu.
YIHO e boetse e hlahisa monolithic drop-in-in replaceable silicon carbide cyclone le hydrocyclone liner tse etselitsoeng ka ho khetheha bakeng sa ho arola le ho arola likopo.Lithapo tsena tsa ceramic li etselitsoe lirafshoa tse chefo haholo ho kenyelletsa mashala, tšepe, khauta, koporo, samente, merafo ea phosphate, pulp & pampiri le FGD e metsi mme li fumaneha ka boholo bo fihlang ho 60 ″ ka bophara.
Ho na le mefuta e fapaneng ea lipina tsa ceramic tse sa hloekeng haholo, tse eketsang bophelo ba leholiotsoana le ho felisa litšenyehelo tse phahameng tsa ho kenya ka tloaelo tse fumanoang meahong ea lithaele tse epoxied.Sena se thusa li-OEM le limela tse le 'ngoe ho fihlela sepheo sa ts'ebetso ea lichelete ka ho ntlafatsa katleho ea likarolo.
YIHO e fana ka kopano e feletseng ea hydrocylone kapa libaka tse phahameng tsa ho apara ho kenyeletsa le holimo le li-spigots.Li-cones, li-cylinders, li-vortex finder le li-volute feed inlet heads li entsoe ka nepo bakeng sa kopano e ka phetoang ka har'a hydrocyclone ea hau e teng.
Lintlha tsa Tekheniki tsa Silicon Carbide + Polyurethane
Lintlha tsa polyurethane | |||
Boima bo khethehileng 1 | 1.3kg/L | Matla a Kgapha | 40-100KN/m |
Shore A Hardness | 35-95 | Matla a tšepe | 30-50MPa |
Akron abrasion | <0.053(CM3/1.61km) | Phetoho | <8% |
Mocheso oa Mosebetsi | -25-80 ℃ | Matla a Insulation | E kgabane |
Matla a ho atolosa | 70KN/m | Ho hanyetsa mafura | E kgabane |
Silicon CarbideLintlha(RBSiC) | ||
Index | Boleng | Sephetho sa teko |
Sic | / | ≧90 |
Mocheso | ℃ | 1380 |
Tekano e Itseng | g/cm3 | ≧3.02 |
Open Porosity | % | <0.1 |
Modulus ea elasticity: | GPA | 330Gpa (20 ℃) 300Gpa(1200 ℃) |
Bothata ba Moh | / | 9.6 |
Matla a kobehang | Mpa | 250(20℃)/ 280 (1200℃) |
Matla a Khatello | Mpa | 1150 |
Coefficient ea katoloso ea mocheso: | / | 4.5K^(-3)*10^(-5) |
Coefficient of thermal conductivity: | W/mk | 45 (1200 ℃) |
Acid Alkaline - bopaki | / | E kgabane |